TL/H/5583ADC0831/ADC0832/ADC0834 and ADC08388-Bit Serial I/O A/D Converters with Multiplexer OptionsJanuary 1995ADC0831/ADC0832/ADC0834 and ADC08388-B
Connection DiagramsADC0838 8-Channel MUXSmall Outline/Dual-In-Line Package (J, M and N)TL/H/5583–8Top ViewADC0834 4-Channel MUXSmall Outline/Dual-In-L
Functional Description1.0 MULTIPLEXER ADDRESSINGThe design of these converters utilizes a sample-data com-parator structure which provides for a diffe
Functional Description (Continued)TABLE II. MUX Addressing: ADC0838Single-Ended MUX ModeMUX Address Analog Single-Ended ChannelÝSGL/ ODD/ SELECT012345
Functional Description (Continued)Since the input configuration is under software control, itcan be modified, as required, at each conversion. A chann
Functional Description (Continued)4. When the start bit has been shifted into the start locationof the MUX register, the input channel has been assign
Functional Description (Continued)4.0 THE ANALOG INPUTSThe most important feature of these converters is that theycan be located right at the analog s
Functional Description (Continued)This zener is intended for use as a shunt voltage regulatorto eliminate the need for any additional regulating compo
Applications (Continued)Digital Link and Sample Controlling Software for theSerially Oriented COP420 and the Bit Programmable I/O INS8048TL/H/5583–13C
Applications (Continued)A ‘‘Stand-Alone’’ Hook-Up for ADC0838 Evaluation*Pinouts shown for ADC0838.For all other products tie topin functions as shown
Applications (Continued)Digitizing a Current FlowTL/H/5583–15Operating with Ratiometric TransducersTL/H/5583–37*VIN(b)e0.15 VCC15% of VCCsVXDRs85% of
Absolute Maximum Ratings (Notes1&2)If Military/Aerospace specified devices are required,please contact the National Semiconductor SalesOffice/Dist
Applications (Continued)Span Adjust: OVsVINs3VZero-Shift and Span Adjust: 2VsVINs5VTL/H/5583–1620
Applications (Continued)Obtaining Higher ResolutionTL/H/5583–17Controller performs a routine to determine which input polarity (9-bit example) or whic
Applications (Continued)High Accuracy ComparatorsTL/H/5583–38DOeall 1s ifaVINlbVINDOeall 0s ifaVINkbVINDigital Load CellTL/H/5583–19#Uses one more wir
Applications (Continued)4 mA– 20 mA Current Loop Converter#All power supplied by loop#1500V isolation at output TL/H/5583–20Isolated Data Converter#No
Applications (Continued)TL/H/5583–21Two Wire Interface for 8 Channels24
Applications (Continued)Two Wire 1-Channel InterfaceTL/H/5583–22Ordering InformationPart NumberAnalog Input TotalPackageTemperatureChannels Unadjusted
Ordering Information (Continued)Part NumberAnalog Input TotalPackageTemperatureChannels Unadjusted Error RangeADC0834BCN4g(/2 Molded (N) 0§Ctoa70§CADC
27
Physical Dimensions inches (millimeters)Ceramic Dual-In-Line Package (J)NS Package Number J08ACeramic Dual-In-Line Package (J)NS Package Number J14A28
Physical Dimensions inches (millimeters) (Continued)Ceramic Dual-In-Line Package (J)NS Package Number J20AHermetic Dual-In-Line Package (M)NS Package
Converter and Multiplexer Electrical Characteristics (Continued)The following specifications apply for VCCeVae5V, TAeTje25§C, and fCLKe250 kHz unless
Physical Dimensions inches (millimeters) (Continued)Hermetic Dual-In-Line Package (M)NS Package Number M20BMolded Dual-In-Line Package (N)NS Package N
Physical Dimensions inches (millimeters) (Continued)Molded Dual-In-Line Package (N)NS Package Number N14AMolded-Dual-In-Line Package (N)NS Package Num
ADC0831/ADC0832/ADC0834 and ADC08388-Bit Serial I/O A/D Converters with Multiplexer OptionsPhysical Dimensions inches (millimeters) (Continued)Molded
AC CharacteristicsThe following specifications apply for VCCe5V, tretfe20 ns and 25§C unless otherwise specified.TypTested DesignLimitParameter Condit
Typical Performance Characteristicsvs VREFVoltageUnadjusted Offset ErrorVoltageLinearity Error vs VREFTemperatureLinearity Error vsTL/H/5583–2Linearit
TRI-STATE Test Circuits and Waveformst1Ht0HTL/H/5583–4t1Ht0HTL/H/5583–23Timing DiagramsData Input TimingTL/H/5583–24Data Output TimingTL/H/5583–25ADC0
Timing Diagrams (Continued)ADC0831 TimingTL/H/5583–27*LSB first output not available on ADC0831.ADC0832 TimingTL/H/5583–28ADC0834 TimingTL/H/5583–57
Timing Diagrams (Continued)ADC0838 TimingTL/H/5583–6* Make sure clock edgeÝ18 clocks in the LSB before SE is taken low8
ADC0838 Functional Block DiagramTL/H/5583–7*Some of these functions/pins are not available with other options.Note 1: For the ADC0834, D1 is input dir
Comments to this Manuals