Rainbow-electronics MAX1419 User Manual download pdf

General Description

The MAX1419 is a 5V, high-speed, high-performance

analog-to-digital converter (ADC) featuring a fully differ-

ential wideband track-and-hold (T/H) and a 15-bit con-

verter core. The MAX1419 is optimized for multichannel,

multimode receivers, which require the ADC to meet very

stringent dynamic performance requirements. With a

noise floor of -79.3dBFS, the MAX1427 allows for the

design of receivers with superior sensitivity.

The MAX1419 achieves two-tone, spurious-free dynamic

range (SFDR) of -91dBc for input tones of 10MHz and

15MHz. Its excellent signal-to-noise ratio (SNR) of 76.2dB

and single-tone SFDR performance (SFDR1/SFDR2) of

93.1dBc/95.5dBc at f

= 15MHz and a sampling rate of

65Msps make this part ideal for high-performance digital

receivers.

The MAX1419 operates from an analog 5V and a digital

3V supply, features a 2.56V

P-P

full-scale input range,

and allows for a sampling speed of up to 65Msps. The

input T/H operates with a -1dB full-power bandwidth of

200MHz.

The MAX1419 features parallel, CMOS-compatible out-

puts in two’s-complement format. To enable the interface

with a wide range of logic devices, this ADC provides a

separate output driver power-supply range of 2.3V to

3.5V. The MAX1419 is manufactured in an 8mm x 8mm,

56-pin thin QFN package with exposed paddle (EP) for

low thermal resistance, and is specified for the extended

industrial (-40°C to +85°C) temperature range.

Note that IF parts MAX1418, MAX1428, and MAX1430

(see the Pin-Compatible Higher/Lower Speed Versions

Selection table) are recommended for applications that

require high dynamic performance for input frequen-

cies greater than f

CLK

/3. The MAX1419 is optimized for

input frequencies of less than f

CLK

/3.

Applications

Cellular Base-Station Transceiver Systems (BTS)

Wireless Local Loop (WLL)

Single- and Multicarrier Receivers

Multistandard Receivers

E911 Location Receivers

Power Amplifier Linearity Correction

Antenna Array Processing

Features

♦ 65Msps Minimum Sampling Rate

♦ -79.3dBFS Noise Floor

♦ Excellent Dynamic Performance

76.2dB SNR at f

=15MHz and A

= -1dBFS

93.1dBc/95.5dBc Single-Tone SFDR1/SFDR2 at

= 15MHz and A

= -1dBFS

-91dBc Multitone SFDR at f

IN1

= 10MHz

and f

IN2

= 15MHz

♦ Less than 0.25ps Sampling Jitter

♦ Fully Differential Analog Input Voltage Range of

2.56V

P-P

♦ CMOS-Compatible Two’s-Complement Data Output

♦ Separate Data Valid Clock and Overrange Outputs

♦ Flexible-Input Clock Buffer

♦ EV Kit Available for the MAX1419

(Order MAX1427EVKIT)

MAX1419

15-Bit, 65Msps ADC with -79.3dBFS

Noise Floor for Baseband Applications

________________________________________________________________ Maxim Integrated Products 1

Ordering Information

19-3011; Rev 1; 2/04

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

EVALUATION KIT

AVAILABLE

Pin Configuration appears at end of data sheet.

PART TEMP RANGE PIN-PACKAGE

MAX1419ETN -40°C to +85°C 56 Thin QFN-EP*

Pin-Compatible Higher/Lower

Speed Versions Selection

PART

SPEED GRADE

(Msps)

TARGET

APPLICATION

MAX1418 65 IF

MAX1419 65 Baseband

MAX1427 80 Baseband

MAX1428* 80 IF

MAX1429* 100 Baseband

MAX1430* 100 IF

Future product—contact factory for availability.

EP = Exposed paddle.

1 2 3 4 5 6 ... 17 18

Summary of Contents

Page 1 - AVAILABLE

General DescriptionThe MAX1419 is a 5V, high-speed, high-performanceanalog-to-digital converter (ADC) featuring a fully differ-ential wideband track-a

Page 2 - ELECTRICAL CHARACTERISTICS

MAX141915-Bit, 65Msps ADC with -79.3dBFSNoise Floor for Baseband Applications10 ______________________________________________________________________

Page 3