Rainbow-electronics ATmega32L User Manual download pdf (Page 46)

100

101

ATmega32(L)

2503C–AVR–10/02

• Bit 0 – IVCE: Interrupt Vector Change Enable

The IVCE bit must be written to logic one to enable change of the IVSEL bit. IVCE is

cleared by hardware four cycles after it is written or when IVSEL is written. Setting the

IVCE bit will disable interrupts, as explained in the IVSEL description above. See Code

Example below.

Assembly Code Example

Move_interrupts:

; Enable change of interrupt vectors

ldi r16, (1<<IVCE)

out GICR, r16

; Move interrupts to boot Flash section

ldi r16, (1<<IVSEL)

out GICR, r16

ret

C Code Example

void Move_interrupts(void)

{

/* Enable change of interrupt vectors */

GICR = (1<<IVCE);

/* Move interrupts to boot Flash section */

GICR = (1<<IVSEL);

}

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 312 313

Comments to this Manuals

No comments

Rainbow-electronics ATmega32L User Manual Page 46

Comments to this Manuals

Related products and manuals for Sensors Rainbow-electronics ATmega32L