Rainbow-electronics GE863-GPS low power User Manual download pdf (Page 14)

GE863-GPS Software User Guide

1vv0300724 Rev. 3 - 05/07/07

2.4.1.3 Hardware Unconditional SHUTDOWN

To unconditionally SHUTDOWN the GE863-GPS the pin RESET# must be tied low for at least 200

milliseconds and then released.

A simple circuit to do it is:

NOTE: don't use any pull up resistor on the RESET# line nor any totem pole digital output.

Using pull up resistor may bring to latch up problems on the GE863-GPS power regulator and

improper functioning of the module. The line RESET# must be connected only in open

collector configuration.

TIP: The unconditional hardware RESET should be always implemented on the boards and

software should use it as an emergency exit procedure.

RESET#

Unconditional Power OFF

impulse

GND

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 121 122

No comments

Rainbow-electronics GE863-GPS low power User Manual Page 14