General DescriptionThe MAX6921/MAX6931 are 20-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface amultiplexed VFD tube to a VFD
MAX6921/MAX6931A multiplexed tube dissipation example follows:VCC= 5V ±5%, VBB= 36V to 42V, A = 12, G = 8, IANODE= 0.4mA, IGRID= 24mAPD= (5.25V x 1mA)
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers_____________________________________________________________________________________
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers12 __________________________________________________________________________________
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers_____________________________________________________________________________________
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube DriversMaxim cannot assume responsibility for use of any circuitry other than circuitry enti
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers2 ___________________________________________________________________________________
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers_____________________________________________________________________________________
Typical Operating Characteristics(VCC= 5.0V, VBB= 76V, and TA= +25°C, unless otherwise noted.)MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tub
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers_____________________________________________________________________________________
MAX6921/MAX693120-Output, 76V, Serial-Interfaced VFD Tube Drivers6 ___________________________________________________________________________________
Detailed DescriptionThe MAX6921/MAX6931 are VFD tube drivers compris-ing a 4-wire serial interface driving 20 high-voltage Rail-to-Railoutput ports.
MAX6921/MAX6931Writing Device Registers Using the4-Wire Serial InterfaceThe MAX6921/MAX6931 are normally written using thefollowing sequence:1) Take C
Output Current RatingsThe continuous current-source capability is 40mA peroutput. Outputs may drive up to 75mA as a repetitivepeak current, subject to
Comments to this Manuals